Specification
4pcs / 6pcs CE4M Printhead: UD-19C6AC / 6Heads / 1920mm
UD-19C6AE / 6Heads / 1920mm
4pcs / 8pcs CE4M Printhead: UD-18C8AC / 8heads / 1820mm
UD-18C8AE / 8Heads / 1820mm
| MODEL | UD-25C8AC |
| Printhead | TOSHIBA CE4M |
| Number of printhead | 4 | 4x2 |
| Printing Width | 2,500mm |
| Material Width | 2,580mm |
| Ink | Type | ECO Solvent Ink |
| Color | C M Y K | C M Y K
C M Y K |
| Print Mode | Outputs(m2/h) |
| Draft 3pass | 42 | 80 |
| Standard 4pass | 32 | 60 |
| Quailty 6pass | 21 | 40 |
| High Quality 8pass | 16 | 32 |
Advantages
1. Supper Excellent Drops Position Accuracy
Accurate drops position can achieve extraordinary piezoelectric
process and injecting control technology
1) Single pass application
Achieve higher printing speed From extensive array printing to
extensive vast printing by installing multiple heads
2) For a scan application program
The increasing of throughput can reduce scan times By increasing
multiple printheads of each color
2. Compatible UV Curing And Oil Base Pigment Ink
1) Oil base pigment ink is fast dried, suitable for applying to
required absorbent material
2) UV curing ink is suitable for applying to non-absorbent
material, and it’s suitable for all kinds of industry application
3. Steady Injecting Water Circulation Temperature Control System
And 636 Channel
1) CE4M printhead are equipped water channel and chassis of water
interface. Circulation heating water create even temperature for
printhead, to make steadier inject capability.
4. Ink Volume Range
1) Extraordinary technology that Multiple inject to one point
create extensive half-tone and each drop range from at least 5PL to
at largest 90pl.
2) Compare to common binary printhead, it’s more suitable for all
kinds of industry printing which describing smooth density level to
dark.
5.Higher Driving Frequency ( especially in micro drops)
Regards 1: Data transfer mode is 15KHZ or others.
Regards 2: Driving frequency 1-6 drop in CA3 is reference.
Regards 3: The above data is base on Toshiba internal testing
Result. Optimizing driving frequency can be different depend on
different ink.
Power Supplier Safety
Attention: For safety of the operator and Printer, ground wire must
be connected! The printer
should be installed by qualified maintenance technician.
1. Power supply: single-phase 220V AC /50HZ. Max power: 1000W,
Print power: 100W
2. Using only the power type that the printer label identified. You
can choose 110V AC or 220V AC power supply according to your
countries or regions’ applications.
3. Connecting all equipments to a properly ground outlet to avoid
the use of sockets with those in the frequent switching between on
and off the device (such as: photocopiers, air-conditioning
systems) in the same circuit.
4. Avoid to use of wall-board switch or autotimer controlled
outlet, always turn off your printer by the power switch which is
on the right side of printer.
5. Do not use damaged or broken power wire.
6. If additional power wire has to be used, make sure the sum of
amperage of other device and the additional power device can not
exceed the rated amperage of the power supply. Do remember the sum
of amperage of other devices and the additional power wire plugged
into the wall can not exceed the wall outlet’s rated amperage of
power supply.
7. Keep your computer system away from electromagnetic interference
source(s) such as loudspeaker or wireless telephone. Do not try to
repair printer by yourself while meet problems, seeking for help
from printer maintenance technicians in time.
Product Display
