1600mm Manual Vinyl Electrical Cold Wide Format Laminator With Two
Roller
Parameter of Electric Cold Laminator
| Model | Leyenda-1600 |
| Max Width | 1600mm |
| Max thickness | 15mm |
| Max Speed | Adjustment avalibale |
| Laminating Temperature | Normal temperature |
| Voltage | AC220V±10% 50Hz |
| Diameter of Roller | 130/110mm |
| Dimensions | 2000*520*450mm |
| Roller | 2pcs |
| Weight | 135kgs |
Product feature of Electric Cold Laminator
1. It is a wide format laminator, can process items that are up to
63 inches width.
2. The laminated paper can reach effect of waterproof,
anti-corrosion,anti-ultraviolet erosion.
3. It is equiped with foot peda.This makes easier operation.
4. It is cold laminator without heating. can be used to mount
boards pvc,paper,photo.
5. It is equiped with stand.
Series cold laminator is a type of electrical cold laminator with
the characteristics of simple structure, economical and practical.
Foot switch controls are humanized, and operation processes are
simpler and more convenience, so it can be widely used in more
industry such as exhibition industry, advertisement industry,
ink-jet printing industry, photo studio, and etc. With options of
adding let off mechanism for coiled material and rolling mechanism
for finished product, it is applicable to use no-leave paper cold
laminating film, so as to save working place and use manpower.
Application
After printing equipment. Available for photographic, Ad. Shop and
copy shop to do lamination work, adding a protective layer on books
cover, photographic, color pages, documents, charts, drawings,
indoor advertising products, etc.
Operation
The operation is the cold laminating machine is driven by the
manner in which the device is running. Cold laminating machine
operation, there are two: one is the manual, is another electric
type. The manual type refers to the cold laminating machine during
the actual operation, the user needs to manually control process
operation including Lengbiao object out the need for user
intervention. Electric type, some operations are performed by the
device is done automatically.
Plastic shaft pressure adjustment
1. Rotary machine on both sides of the box on the regulator handle,
the upper and lower two-axis separation will be ready for Framed
the diagram and Lengbiao of film placed between the two axes at the
same time, the rotation regulator handle, so that the upper shaft
parallel downward movement, when turning the regulator handle
surprise easily, said two-axis has been in contact with, then
please do not continue down the pressure, simply regulator tight
zone can handle gently. If you continue to pressure, will make the
shaft resulting variant, so that operation failed.
2. Pressure adjustment between the two axis and cold laminating
film, exit from between the two axes. Ready for the film mounted.
electric and manual cold laminator
electric cold laminator machine
electric cold laminator
Note
1. cold laminating machine installed in a special bracket on a
smooth, solid workbench. For a mounted film dedicated platform,
then mounted on the edge of the film machine height height of less
than 5 mm, width 1600 mm, and the length of more than one meter.
2. will need mounted film or empty take the Lengbiao machine
materials on the cold iron roll film before entering face down on
the cold laminating machine after coating. Adjust cold laminating
machine regulator hand wheel lift on the rubber roller, then
piercing the material two rubber roller 10 cm.
3. For mounted film needs to be cold laminating film piercing cold
laminating machine rubber roller 10 cm, on supplies above, film and
supplies both sides of the channel must be aligned.
4. adjust the position of the supplies in the platform, so that
both ends of the surface in the cold laminating machine tightness
is consistent, then adjust the regulator hand wheel on the machine,
to lay down on the rubber roller, transferred to the air-way
position. Both ends of the pressure must be consistent.
Product Photos
